orbit 1 outlet tap timer manual

DIAL—Rotate the dial to customize your
watering schedule.
+/- ButtonsUse these buttons to adjust
time and program. While in AUTO press + to
activate Rain Delay.
ARROW—Moves cursor around the screen
during programming.
MANUAL—Press to water manually
CLEAR—Press to clear programming.
RESET—Press to reset back to factory settings.
AUTOTimer waters according to your
customized schedule.
SET CLOCK—Set the time of day.
START TIME—Select what time you would
like to start watering.
HOW LONG—Determine how long to water
HOW OFTENChoose how often you will water
OFFTurn off all watering.
INSTALLING THE BATTERIES
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AA (1.5V) alkaline batteries (not
included) and replace the tray.
Note: Firmly replace the battery tray to ensure
water resistance and increase battery life. You
will know the battery tray is fully inserted if it
does not pull out easily. Used up or dead batteries
must be removed from the timer and disposed of
properly. Replace batteries when low battery icon
appears on display. Do not dispose of batteries in
fire. Batteries may explode or leak.
TIMER FEATURES
PROGRAMMING THE TIMER
Set Clock and Day
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM. Timer advances faster if
button is held down.
3. Press the ARROW button to set current day.
4. Press the +/- buttons to move between and
select the current day of the week. Press the
ARROW button to toggle back to the time
of day.
5. Turn dial to save changes
Start Time
A start time is the time of day that the timer
will begin to water. This timer features four
start times (A, B, C, & D).
1. Turn dial to START TIME.
2. Press the ARROW button to move through and
select a start time; A, B, C, and/or D.
PM
S M T W T F S
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit
®
, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
0000
Orbit
®
1.801.299.5555
orbitonline.com
Glue
Folded Flat Additional Information
PRIN TERS ARE
REQUIRED TO MATCH
ALL SP ECIFIED
PMS COLORS.
K
DATE: 09/20/2017
DESIGNER: NK MARKETING: CD
SOFTWARE: Adobe Indesign CC
ARTWORK №: 9678124 rD
L:
W:
H:
0.0″ W:
H:3.0″
1.5
12.0
6.0″
When expecting freezing temperatures, timers
should be removed from the tap and stored
indoors to avoid potential freeze damage.
Filter traps dirt particles, prolonging
life of timer. Clean filter regularly and
replace if worn.
Important, please read!
3. Using the +/- buttons, set your first start time,
including AM and PM. Timer advances faster
if button is held down. A box is placed around
each programmed start time.
Note: To remove a start time press CLEAR.
4. Repeat steps 2 – 3 to program additional
start times.
Note: Only one start time is required.
5. Turn dial to save changes.
How Long
1. Turn dial to HOW LONG.
2. Using the +/- buttons, select watering
duration from 1 to 360 minutes. Timer
advances faster if button is held down.
Note: To remove a watering duration
press CLEAR.
3. Turn dial to save changes.
1 Outlet Tap
TIMER
START TIME
B C
CYCLE
DA
CYCLE
A
MINUTES
START TIME
AM
BC
CYCLE
D
PM
SMTWTF S
INTERVAL
A
MINUTES
MANUAL
HOURS DAYS
RAIN
DELAY
EVERY NEXT
HOSE TAP
CONNECTION
OUTLET
MANUAL
CLEAR
FILTER
DIAL
RESET
LOW BATTERY
INDICATOR
+/ BUTTONS
ARROW
Timer does not water.
Check if:
Timer is set to AUTO.
Tap is on.
Batteries are low.
Clock is set to correct time,
including AM and PM.
Rain Delay is on.
Water won’t turn off.
Check if:
HOW LONG is set to desired time.
HOW OFTEN is set to desired
interval hour or day.
WARNINGS:
For cold water outdoor irrigation use only.
Not for use on appliances.
Working water pressure:
Minimum: 68 kPa (0,68 bar)
Maximum: 689 kPa (6,89 bar)
Working temperature:
Maximum: Do not exceed 49°C
Minimum: Keep from freezing
Manual/Hand Watering
This feature allows you to water without
interrupting your set schedule. To access this
feature, follow the steps below.
1. With the dial on AUTO, press the
MANUAL button.
2. Using the +/- buttons, select watering
duration from 1 to 360 minutes.
Note: There may be a slight delay between the
time the manual button is pressed and when
watering begins.
3. Screen will flash between clock and
time remaining before automatic
programming resumes.
4. To stop manual watering, turn the dial
to OFF and then back to AUTO to resume your
programmed watering schedule.
TROUBLESHOOTING
Water does not come on at desired time.
Check if:
Clock is set to correct time,
including AM and PM.
Dial is set to “Auto”
Start time is set to desired time,
including AM and PM.
Rain Delay is on.
ADDITIONAL FEATURES
Rain Delay
Rain delay allows you to postpone watering for
a set period of time. To access the rain delay,
follow the steps below.
1. With the dial on AUTO, press the + button to
select a delay of 1 to 7 days.
2. Screen will flash between clock and hours
remaining before programmed cycle resumes.
3. To remove rain delay, turn dial to OFF and then
back to AUTO.
How Often
1. Turn dial to HOW OFTEN.
2. There are two ways to set your watering
frequency; Days of the Week or Interval.
Days of the week – Select specific days you want
to water:
Using the ARROW button move to the
desired day.
Press the + / – buttons to toggle the day
of the week on/off.
Select any combination of days.
Interval – Select an interval period you want
to water:
Using the ARROW button move to INTERVAL.
Press the + / – buttons to cycle through each
interval. You may choose to interval water
every 6 hours, 12 hours, or 1 to 7 days.
3. Turn dial to save changes.
Congratulations!
Your timer is now programmed. Turn your dial to
AUTO to allow your timer to water according to
programmed time, duration, and frequency.
MINUTES
MANUAL
© 2017 Orbit Irrigation Products, Inc.
All rights reserved. All trade names are
registered trademarks of respective
manufacturers listed.
Orbit
®
Irrigation Products, Inc.
North Salt Lake, UT 84054 USA
PN 96781-24 rD
CYCLE
PM
A
HOURS
RAIN
DELAY
S M T W T F S
INTERVAL
HOURS
EVERY

Leave a Comment